10 years of technology innovation, we have been from a single inertial module supplier to a 3D motion tracking solution provider with independent core technology. Our products include a variety of small motion tracking and attitude measurement sensors (IMU / VG / AHRS / GPS-INS / Marine Sensor), hybrid inertial vision tracker and other analysis system
iVM-800 is an inertial navigation systems based on the robust and cost-effective MEMS technology.
In land applications, GPS signal may be disrupted. The combination of VMSENS Inertial Navigation System with complementary technologies such as wheel speed sensor and RTK GNSS is the key to provide smooth vehicle positioning , even in urban canyons, forest, tunnel, etc.
To save both time and money, we have tested and selected the best equipment to build a cost-effective and all-in-one package – iVM-800 Solution.
Base on miniature MEMS sensor, VMSENS has developed inertial Motion Sensors iVM-900 to meet the requirements of the marine sector.
This solution can provides high accuracy motion measurement data in dynamic environment in all areas from a wide range of offshore applications including crane and winch control, wave and ship motion measurement in all condition
The iVM-x is a high performance, miniature, gyro-enhanced motion tracking system (IMU/ VRU/ AHRS/ GPS-INS). Its internal low-power signal processor provides a quaternion-based iMTFusion™ algorithm to output drift-free 3D orientation as well as calibrated 3D acceleration, 3D rate of turn and 3D earth-magnetic field data.
The iVM™-x can be widely used for stabilization and control of cameras, antenna robots, vehicles and equipment and also other field where high-performance 3D orientation measuring is needed.
In order to meet the customer's very strict requirements for the stability of position and attitude measurement and data output, it is often necessary to achieve 0.00001 data stability. The common high-precision optical positioning system is also very difficult to meet the requirements.
With PZ stabilizer system we can provides high-precision attitude and position measurement solutions for laser positioner, Mix reality, real-timeVFX and other fields
-Provide real-time solution and fusion of data, and effectively solve the problems such as tracking and blocking, equipment vibration, drift, etc
-Effectively reduce the number of optical capture cameras and investment cost
-Reduce the time required for later data cleansing
-Support two kinds of optical motion jitter problems: inside out / ouside in
-Docking compatible with optical capture systems such as vicon, optitrack
-Provide a complete software running environment, easier to use
-Support OEM customization
iVsion series is an advance commercial inertial-optical tracking system. It provides a robust and portable tracking solution with continuous tracking output even during short optical occlusions. Easily installed in moving vehicles, aircraft, simulators,HMD、HUD、MR/ VR, industrial and lab environments, the system is designed to be simple and flexible allowing for convenient integration into unique configurations.
- High performance, our advanced sensor fusion algorithms provides smooth, fast, and accurate tracking in real time.
- Low Cost, the hybrid inertial-optical technology of the allows for a simple set-up with only one module to achieve full 6-DOF tracking, minimal hardware and cost savings for development and deployment.
-Support OEM customization
Continuing the success that VMSENS inertial technologies provides motion tracking solution, now, the VM-i is a ideal multi-purpose sensor for real-time applications in stabilization and control of cameras and antenna, robots, vehicles and other (un)manned equipment, simulation & training, virtual & augmented reality.
The VM-i integrates 3D orientation MEMS elements, utilizing VMSENS Sensor Fusion algorithms to process full 360° orientation tracking to provides real-time and drift-free 3D orientation data
For the demands of sports and health application, VMSENS with 10 years of experience, understands the analysis needs of professionals for the biomechanical motion kinamatic of the human body. We provide accurate measurement and easy-to-use sensor system platforms. Our professional technical can provide developers and application providers with professional and reliable solutions, allowing your application to quickly face the market
iVM-w-I is a completely wireless motion tracker without signal & power line restrictions, can be use anywhere, under any lighting condition: outside, office, no lab or simulated environment required.
One of the breakthroughs of the iVM™-w is the Mon-Bus™ wireless protocol; this wireless protocol can be used to real-time talk with multiple motion trackers wireless with low latency.
The iVM-w-I can be widely used for virtual reality, motion analysis and also other field where low-cost & high-performance 3D orientation measuring is needed.
-Completely wireless inertial motion trackers
-ISM 2.4 GHz radio frequency, worldwide license free use
-Real-time computed attitude/heading and inertial dynamic data
-360º orientation referenced by gravity and Earth Magnetic Field
-Integrated with other force /EMG platforms
iVM-w-II universal human motion tracker is a motion tracker for human motion measurement in commercial applications. It is suitable for customer applications that require high precision, stability, durability and are very sensitive to cost. It is your better choice tracker in large-scale commercial applications, development system
iVM-w-II can provide different wireless protocol, like Bluetooth/ 2.4G Mon-Bus,
The iVM-w-I can be widely used for virtual reality, motion analysis and also other field where low-cost & high-performance 3D orientation measuring is needed.
-Completely wireless inertial motion trackers
-ISM 2.4 GHz radio frequency, worldwide license free use
-Real-time computed attitude/heading and inertial dynamic data
-360º orientation referenced by gravity and Earth Magnetic Field
-support with human kinematic data.
iVM-w-III is a cost-effective sensor system , it is suitable for large-scale use. It has the advantage of low cost.
Ultra small size package is suitable for motion capture and motion monitoring of human small joints, such as spine and fingers. At the same time, low-cost price is the best choice for large-scale use
-Completely wireless inertial motion trackers
-ISM 2.4 GHz radio frequency, worldwide license free use
-Real-time computed attitude/heading and inertial dynamic data
-360º orientation referenced by gravity and Earth Magnetic Field
-support with human kinematic data.
Mox Bio Analysis is a flexible, camera-less full-body human motion capture solution. This portable system can be used indoors and outdoors.
Mox Bio Analysis can be used in sports science, rehabilitation,biomechanics research area.
-21 inertial motion trackers
-Special design & comfortable motion capture suit
-Advantage strap-down sensor system
-Wireless data transfer up to 1000meter(Max)
-Portable case for easy transportation
-Export pop motion capture file formats .BVH .C3D and raw data.
-Advanced human body model provides output of 23 body segments
-Advance spine and shoulder parameter design, more detail in these segments
-Full body segment kinematics ( position, velocity, acceleration, orientation, angular velocity, angular acceleration)
Highly accurate, sensitive, and repeatable, this low-cost sensor is perfect for many application
3D kinematics motion measurement system, captures human movement data, in real-time, Live stream highly accurate motion data to Product Lifecycle Management (PLM) software provided, improve time to market of products and processes in a simple and efficient way.
MoX Suit is a flexible, camera-less full-body human motion capture solution. This portable system can be used indoors and outdoors.
Mox can be used in Virtual Reality / Augments Reality, Training & Simulation.
Mox can be integrated with PLM system ( Siemens Jack / Delmia ) , and also can be streaming data into VBS/ Unreal/ OSG.
MoX Glove is a flexible, camera-less hand motion capture solution. This portable system can be used indoors and outdoors.
Mox can be used in Virtual Reality / Augments Reality, Training & Simulation area.
Mox have 15 points sensor solution, can track very small motion of fingers, used in a accurcy applications.
For the different applicaions, how to display the data is very important, we can provide nDisplay / Cave/ Head Mount Display / Stereo Display system.
And also, our tracker can be easy integrated to the display system.
PLM system can improve time to market of products and processes in a simple and efficient way. Our PLM interface can live stream body and finger motion capture data into Siemens Jack / Process Simulate Human / Delmia system.
We also provide interface with the third-party application engine for to meet the different needs of applications.
For more detail, contact with us directly.
10 years of focus on inertial sensor fusion technology, innovate and cooperate , and gradually develop into a inertial positioning technology solution provider with independent core technology
Our technology is used in intelligent industry, film and television animation, and medical industry. We are familiar with the operation rules and related technologies of different industries, which can better meet your professional needs
We have the hardware & software system scheme with independent intellectual property rights that has been tested in practice, which can provide customers with hardware products quickly. Our accumulated experience in software algorithm and application technology can greatly save the development investment cost for you